Pallets and free uprights configurator Estimated form completion time: 5 minutes Requested by (Agent) Email address of person completing the form CUSTOMER DETAILS Company name Company contact email Telephone/mobile phone VAT number Contact person name Shipping address finished product QUANTITY Quantity required Any quantity 2 Any quantity 3 DIMENSIONS Dimension A (mm), as shown in the figure Dimension B (mm), as shown in the figure Dimension C (mm), as shown in the figure Dimension D (mm), as shown in the figure OPTIONS Does the pallet have to be stackable? YESNO CupsRims Specify the type of ground support With pipe uprights Want to close the upright with a plate? YESNO Specify the type of ground support With pipe uprightsWith sled on the long sidesWith sled on the short sidesWith sled on both sides Want to close the upright with a plate? YESNO Want a ground support material other than steel for the sled? YESNO Solid woodPlywoodHard plasticSoft rubber Application of the material: Glued to the steel sledRiveted to the steel sledScrewed to the steel sled Specify the type of ground support With cupsWith pipe uprightsWith sled on the long sidesWith sled on the short sidesWith sled on both sides Want to close the upright with a plate? YESNO Want a ground support material other than steel for the sled? YESNO Solid woodPlywoodHard plasticSoft rubber Applicazione Material: Glued to the steel sledRiveted to the steel sledScrewed to the steel sled Want the pallet bottom in sheet metal? YESNO Sheet metal type: Smooth steelCorrugated steel Sheet metal fastening to the pallet: WeldedScrewedRiveted Want the pallet bottom in rubber/plastic? YESNO Material - Default colour BLACK: Soft rubberHard plastic Attachment to the pallet: GluedRiveted Want sheet metal side panels (closed pallet)?YESNO On which sides? 1 long side1 short sideBoth long sidesBoth short sidesAll 4 sides Specify the type of sheet metal wanted: Corrugated with flattened/bent blunt top edgeSmooth with flattened blunt top edge Want a hatch that can be opened on the sides of the pallet?YESNO Specify the type of hatch: MeshSheet metal On which sides? 1 long side1 short sideBoth long sidesBoth short sidesAll 4 sides Specify the type of sheet metal wanted: Corrugated with flattened/bent blunt top edgeSmooth with flattened blunt top edge Want to apply an inner coating? YESNO Select which parts: BottomSidesMesh hatch Type of covering material: Soft rubberHard plasticWood Type of wood: PlywoodMFDChipboardOSB Choice of thickness [in mm] 91218 Want special surface finishes for the wood? YESNO Indicate which ones: Attachment of covering: GluedRivetedScrewed Attachment of the covering - Default colour BLACK: GluedRivetedScrewed Want tubular reinforcements on the sides of the pallet? YESNO On which sides? 1 long side1 short sideBoth long sidesBoth short sidesAll 4 sides Specify the number of tubular pipes, the height of the one closest to the surface and the spacing between any other tubular pipes: Want fork guides consisting of 2+2 sheet metal Us in a thickness suitable for the pallet's load-bearing capacity? YESNO On which sides? long sideshort sideboth sides What should the dimensions of the forking section be? Enter dimensions What should be the centre-to-centre distance between fork slots? Enter centre-to-centre distance The pallet is tilted sideways (0/ +- 90°) by means of the fork slots? YESNO What is the desired pallet bottom/surface load [kg]? - Standard loads 1000/1500/2000 Enter desired load What is the desired load capacity on the sides of the pallet [kg]? - By default it is equal to 10% of that on the bottom. Enter desired load Enter desired RAL colourYellow RAL 1007Orange RAL 2004Blue RAL 5010Red RAL 3016Sky Blue RAL 5012Grey RAL 7001Green RAL 6011White RAL 9010Black RAL 9005GalvanisedSpecial RAL Enter desired RAL colour Necessary to apply a C4M marine paint cycle for particularly corrosive environments? YESNO Is hot-dip galvanising of the pallet necessary? YESNO Needs overpainting? YESNO Enter desired RAL colour Yellow RAL 1007Orange RAL 2004Blue RAL 5010Red RAL 3016Sky Blue RAL 5012Grey RAL 7001Green RAL 6011White RAL 9010Black RAL 9005Special RAL Enter desired RAL colour Are other surface treatments wanted?YESNO Specify the treatment required Need for a structural calculation technical report drawn up by a qualified registered engineer? YESNO Are there special regulations that must be complied with? Specify Weight label needed?YESNO Sticker with measured valueSticker with customer-specified value Specify location: On the surface pipes on one long sideOn the surface pipes on one short side Want painted text?YESNO Specify text - Default font height 40 [mm] on surface pipes Enter text RAL colour Specify location On 1 long sideOn 1 short sideOn both long sidesOn both short sides Do you want a deep-drawn text? obtained by cold pressing on a steel sheet YESNO Specify text - Default font height 40 [mm] on sheet metal then welded to the surface pipes Specify location On 1 long sideOn 1 short sideOn both long sidesOn both short sides Want a painted logo? YESNO SUPPLY LOGO in .PNG BLACK AND WHITE and .DWG/DXF OPTIMISED format - if not available provide logo image Specify location on pallet Want an internal sheet metal separator? YESNO Specify location Long sideShort side at centrelineOther location Specify location Specify Length x Width x Height Specify whether the separator is FixedRemovable Specify whether the separator sheet metal should be SmoothCorrugated Want a painted progressive number?YESNO RAL colour Number sequence Posizione On the surface pipes on one long sideOn the surface pipes on one short side PALLET USE Contents stored on the pallet Type of product Dimensions Material How is the product loaded/unloaded onto/from the pallet?ManuallyWith equipment Specify which Additional precautions with respect to company standards regarding sharp edges? (e.g. edge grinding/burr removal)YESNO How is the pallet handled within the facility?With forkliftOther Specify the minimum length of the forks used for handling Specify fork cross-section Specify whether tipping forks are used YESNO Specify the dimensions of the arm/fork lifting the pallet Specify whether tipping forks are used YESNO Is it necessary to move the fully loaded pallet by applying force to the sides? - e.g. pushing with forks on the sides YESNO The pallet is intended for use in an automated warehouse?YESNO Specify dimensional limits/conditions Is a particularly smooth/aesthetic surface finish required?YESNO Is there a need to increase the standard stackability (1+3 pallets)?YESNO Is it necessary to lift the pallets using a crane?YESNO Is it necessary to weld all edges watertight on the inside (only in the case of pallets with closed sides)?YESNO Is an internal watertight liquid holding tank required?YESNO Indicate the desired tank height Is it necessary to coat the pallet’s interior with an acid-resistant plastic material?YESNO Specify the acids you intend to store Liquid drainage holes are required in the bottom of the pallet?YESNO Indicate position and diameter Are holes or openings necessary on the sides of the pallet (only in the case of pallets with closed sides)?YESNO Indicate hole diameter, dimensions and position SHIPPING Carriage freeCarriage forward Delivery request date NOTE Additional notes/requests/specifications
